Alumi Craft Racers Rule BITD Parker 425 and Sweep Class 10 Podium
Parker, AZThe Best In The Desert’s (BITD) Parker 425 off road race mantra is known as “The Legend Lives On”, however getting a race car to live to the finish line is more than a challenge. As BITD’s season opener and one of the longer races of the series, this event enjoys a large field of contestants. The Class 10 division started with 35 entries and only 22 buggies were able to complete the race. Competitors driving Alumi Craft race cars, it seems, owned an advantage with superior performance ruling the Class 10 field with 13 finishers (13 out of 14 entered), 8 out of the Top 10, and an all Alumi Craft Class 10 Podium sweep including the race win.
The Parker 425 features an approximate 141 Mile challenging race course where competitors do three laps to achieve the “425” mile distance. The Parker, Arizona area offers a variety of desert terrain backdropped against scenic vistas set along the Colorado River. The race taking place in late January offers cold conditions and often wet weather and is a favorite among racers and spectators.
Chase Warren in the #1088 car raced to a first place finish over fellow Alumi Craft Class 10 Competitors; Christian Fessler and Brent Fox, whom finished 2nd & 3rd respectively.
“Well, we ended up getting the big win at the Parker 425 this weekend,” smiled Warren. “We made a decision to make some changes and sacrifice power and speed for reliability and it paid off. We employed a conservative fuel strategy that had us stop 5 times for fuel, not wanting to take the chance of running out. In the end, it looks like it paid off! We had zero issue and the #1088 Alumi Craft was perfect all day! Thank you to everyone that pitched in. It’s such a big effort to even get out there, that coming away with the win is that much more meaningful!
Warren finished the race in 7 Hours, 15 Minutes, and 34.79 Seconds for 1st place over Fessler who finished in 7 Hours, 18 Minutes, and 27.03 Seconds. Brent Fox had a good run too and was just over a minute behind Fessler.
Christian Fessler admitted he faced several challenges along the way to his podium finish. “Besides loosing the clutch at Race Mile 30, our #1003 car was perfect all day and that is the main reason we race an Alumi Craft. The crew had to bump start us out of each pit. And when we got a flat, I had to choose a spot that allowed us to get it going again. It was a good race and I am looking forward to a clean run next time.”
“We had a good weekend at the Parker 425,” stated Brent. “I started in the rear of the field back in 33 position. We raced smart and hard and ended up on the podium with a 3rd place finish. We got one flat that took us out of a chance to finish better! It was another grreat race in the #1075 Fox Construction Alumi Craft Class 10. Thanks everyone that came out to help!
Other notable Alumi Craft finishers were Tanner James who claimed 5th, Cody Reid in 6th, Jared Teague in 7th, and Keith Waibel in 8th. Out of the 14 Alumi Craft’s that started the race, 13 finished with 8 in the Top 10, and an all Alumi Craft Class 10 Podium sweep including the race win.
Tanner James maybe new to the BITD series, however he is well established and familiar as a driver behind the controls of an Alumi Craft Race Car. James races in Austrailia, and at only 20 years old, already has earned multiple race wins in his a single seat Alumi Craft Car. James purchased the #1093 car a couple of weeks prior to the Parker race and traveled from Australia to compete in his first U.S. race with BITD. He will return again in March for the Mint 400.
Most likely the newest car on the race course was Jared Teague’s brand new Class 10 Buggy for and J and J Motorsports freshly built by Alumi Craft and delivered just a few weeks ago back in early January. The bright blue #1047 Class 10 was sitting on display in the Alumi Craft Race Cars contingency booth all day Friday.
Teague was pleased with his new car’s performance. “Any weekend you finish without issues is a good weekend! I finished 7th in a brand new car, we’ll take the finish, and hope to be on the podium soon. Now to prepare for The Mint 400!”
Racers looking for a superior advantage or who desire good preparation and top quality reliable equipment can trust Alumi Craft Race Cars as the source for high performance and competitive value. Give Alumi Craft a call at 619-596-9841 or go to: http://alumicraft.info/ to find out more about our race products and services.
Photography By: Bink Designs
About Alumi Craft
Alumi Craft is the premier race car chassis manufacturer in the off road industry. Crafting cars from lengths of 4130 Chromoly tubing is our specialty. We offer a variety of vehicles to accommodate the professional off road racer to the recreational driver. Since 2004, Alumi Craft racers have earned countless wins, six prestigious Lucas Oil Challenge Cup champions and forty-two points championships; sixteen short course and twenty-six in the desert. Darryl Smith 4X, Gabriel Torres 3X, Darren Hardesty Jr. 3X, CJ Greaves 2X, Rob MacCachren 2X, Luke McMillin 2X, CJ Greaves 2X, Gunnar Peterson 2X, Matthew Owen 2X, Broc Dickerson, Brock Heger, Michael Meister, Chris Browning, Rafael Navarro IV, John Fitzgerald, Adam Ollerton, Aaron Ampudia, Roger Starkey Jr., Nathan Martino, Geoffrey Cooley, Mike Valentine, Andrew McClelland, Luke Johnson, Andrew Myers, Roger Starkey, Mitchell DeJong, Mike Porter, Randy Minnier, Cameron Steele, Matt Cullen, Chuck Cheek, Darren Hardesty, and owner John Cooley have all won championships behind the wheel of an Alumi Craft race car.
Visit // www.alumicraft.info
About Bink Designs
Bink Designs is a premier graphic design company located in San Diego, CA. Since 2007, Bink Designs has been committed to providing cost-effective solutions for clients’ high-end graphic needs. Bink Designs will work with you to develop a strategy that matches your goals. Bink Designs offers a number of services, including: Identity, Print Design, Vinyl Graphics, Web Design, Photography & Apparel.
Visit // www.binkdesigns.com